The XTreme EFIS is a mini-EFIS unit based on a 4.3" sunlight readable, wide viewing angle, high resolution LCD display. It integrates an SD card reader (for software updates and for flight data recorder), 5 function buttons, a rotary control and a basic GPS navigator.

It can be connected to standard MGL Avionics AHRS sensors and RDAC (engine monitor) boxes. It also integrates a CAN Aerospace compatible communications interface that will be used with future versions of MGL Avionics sensors. Standard RS-232 ports are also available.

The XTreme is designed to fit a standard 3 1/8" round instrument hole. The body is located off-center allowing the unit to replace instruments on the right side of a standard 6-pack configuration or any other location that currently occupies two instruments.

Due to the light weight and very low mounting depth no complicated mounting brackets or trays are needed. Power use is low and operation from much less than 12V to around 28V is fully supported.

Note: If you want to add a 2nd display for engine-only data, or if you only need engine information, check out the XTreme EMS

Basic Package Examples:

Application

XTreme Used as Primary Flight Display / AHRS

Used as PFD / Engine Monitor

Used as PFD / AHRS / EMS

Functions

PFD with GPS-derived bank angle

PFD with GPS-derived bank angle

PFD

PFD with GPS-derived bank angle

PFD

 

 

With compass

With Full AHRS

With Engine Monitoring

With Full AHRS and Engine Monitoring

XTreme EFIS

$1,295

$1,295

$1,295

$1,295

$1,295

SP-7 Attitude Sensor

 

 

$700

 

$700

SP-6 Compass Sensor

 

$260

$260

 

$260

RDAC XF

 

 

 

$315

$315

Engine Senders *

 

 

 

$425

$425

TOTAL

$1,295

$1,555

$2,255

$2,035

$2,995

*Note: Samples above shown with basic 4-cyl engine sensors