XTreme EFIS Features:

Hardware:

  • Powerful ARM processor
  • 4.3” high resolution 480x272, sunlight readable, wide viewing aXtreme Back ngle, 600 nits TFT LCD display
  • LED backlight (brightness can be adjusted for low light flying conditions)
  • Fits standard 3 1/8” aircraft instrument panel hole
  • SD Card interface for data recording, user splash screens, checklists, graphic information pages, firmware upgrades etc
  • 1/8” NPT female fittings for Altitude and Airspeed pitot tube connections
  • 1x RS232 communication port
  • 1x MGL Avionics Airtalk communication port
  • 1x MGL Avionics RDAC communications port
  • 1x CAN communication port
  • Rotary control plus 5 independent buttons for easy menu navigation and user input
  • External alarm switch output for an external indicator lamp etc
  • Built in 50 Channel GPS receiver with over 1 million effective correlators with high immunity to jamming
  • Time To First Fix (TTFF) of less than 1 second
  • External active GPS antenna connection
  • Support for an internal or an external GPS receiver
  • Built in RTC (Real Time Clock)
  • Wide input supply voltage range of 8 to 30V DC
  • Built in voltage reversal and over voltage protection for harsh electrical environments
  • Light weight design

EFIS:

  • Attitude display. (Note 1)
  • Magnetic heading indication. (Note 2)
  • GPS-derived bank angle if no Attitude sensor
  • Heading bug
  • Precision altimeter from –1000ft up to a maximum of 30 000ft (-304m to 9144m). Altitude can be displayed in ft or m
  • Altitude bug
  • Airspeed indicator (16mph to 250mph), 1mph resolution. Airspeed can be displayed in mph, km/h or kts
  • Digital VSI indicator (+/-20 ft/min to +/-10 000 ft/min) and analog VSI indicator (+-2000 ft/min range). VSI can be displayed in ft/min or m/s.
  • Serial Altitude encoder output via a RS232 port
  • Density altimeter
  • OAT (Outside Air Temperature) display using an external OAT probe
  • Supply Voltage display
  • Stopwatch timer
  • Automatic flight timer
  • RTC (Real Time Clock)
  • Glide and climb ratio indicator
  • Barometer (actual local pressure)
  • TAS (True airspeed) display
  • G-Force indication. (Note 1)
  • Wind speed and wind direction indication. (Note 2)
  • Turn Indicator. (Note 1)
  • Slip/Skid indicator. (Note 1)

Engine Monitor: (Note 3)

  • 1x Engine RPM
  • 1x Rotor RPM (Note 5)
  • 1x Manifold pressure (Note 6)
  • 1x Oil pressure input
  • 1x Oil temperature input
  • 2x Auxiliary analog channels (Pressure/Temperature/Current)
  • 12 Channel EGT/CHT display
  • 2x Fuel Flow
  • 2x Fuel Level
  • Programmable maintenance timer for scheduled routine engine maintenance
  • Engine display screens are automatically configured to optimize screen space depending on what
  • parameters are been displayed
  • Settable Hobbs meter (password protected)
  • Fuel range / endurance based on TAS or GPS ground speed
  • Supply Voltage display
  • Current monitor to measure charge/discharge currents. (Note 4)
  • Engine leaning feature

General:

  • Alarms on most displays
  • Programmable maintenance timer for scheduled routine engine maintenance
  • Programmable airframe timer for scheduled airframe maintenance.
  • Records maximum and minimum values of most displayed values
  • Built in black box recorder – records all flight data, engine, attitude and GPS data to SD card. Data can be exported to Google Earth, Microsoft Excel, etc.
  • Includes a 1000 entry automatic flight log (Records start date&time, flight time, pilot number, Hobbs time, maintenance time, max altitude, airspeed and VSI reached during the flight)
  • User configurable start up (Splash) screen
  • Unlimited configurable checklists
  • Unlimited configurable graphic information displays
  • Automatic or manual local magnetic variation
  • Dual menu system for quick item selection and user setups
  • Sunrise/Sunset calculator
  • Firmware upgrades via SD Card
  • 3 year limited warranty (MGL Avionics US)

(Note 1) Requires optional MGL Avionics AHRS sensor unit (SP-7/SP-5)

(Note 2) Requires optional MGL Avionics compass sensor unit (SP-6)

(Note 3) Requires optional MGL Avionics RDAC unit

(Note 4) Requires optional MGL Avionics current monitor sensor

(Note 5) Requires RDAC with Rotor RPM input

(Note 6) Requires RDAC with Manifold Pressure